|
reference, declaration → definition
definition → references, declarations, derived classes, virtual overrides
reference to multiple definitions → definitions
unreferenced
|
References
gen/tools/lldb/source/Commands/CommandOptions.inc 40 {LLDB_OPT_SET_ALL, false, "dummy-breakpoints", 'D', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Sets Dummy breakpoints - i.e. breakpoints set before a file is provided, which prime new targets."},
51 {LLDB_OPT_SET_1, false, "dummy-breakpoints", 'D', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Delete commands from Dummy breakpoints - i.e. breakpoints set before a file is provided, which prime new targets."},
59 {LLDB_OPT_SET_1, false, "dummy-breakpoints", 'D', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Delete Dummy breakpoints - i.e. breakpoints set before a file is provided, which prime new targets."},
60 {LLDB_OPT_SET_1, false, "force", 'f', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Delete all breakpoints without querying for confirmation."},
68 {LLDB_OPT_SET_1, false, "dummy-breakpoints", 'D', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Act on Dummy breakpoints - i.e. breakpoints set before a file is provided, which prime new targets."},
76 {LLDB_OPT_SET_1, false, "brief", 'b', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Give a brief description of the breakpoint (no location info)."},
77 {LLDB_OPT_SET_ALL, false, "dummy-breakpoints", 'D', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "List Dummy breakpoints - i.e. breakpoints set before a file is provided, which prime new targets."},
78 {LLDB_OPT_SET_2, false, "full", 'f', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Give a full description of the breakpoint and its locations."},
79 {LLDB_OPT_SET_ALL, false, "internal", 'i', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Show debugger internal breakpoints"},
80 {LLDB_OPT_SET_3, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Explain everything we know about the breakpoint (for debugging debugger bugs)."},
91 {LLDB_OPT_SET_3, false, "disable", 'd', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Disable the breakpoint."},
92 {LLDB_OPT_SET_2, false, "enable", 'e', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable the breakpoint."},
107 {LLDB_OPT_SET_3, false, "dummy-breakpoints", 'D', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Operate on Dummy breakpoints - i.e. breakpoints set before a file is provided, which prime new targets."},
128 {LLDB_OPT_SET_9, false, "all-files", 'A', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "All files are searched for source pattern matches."},
134 {LLDB_OPT_SET_ALL, false, "hardware", 'H', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Require the breakpoint to use hardware breakpoints."},
155 {LLDB_OPT_SET_ALL, false, "append", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Append to saved breakpoints file if it exists."},
166 {LLDB_OPT_SET_ALL, false, "bytes", 'b', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Show opcode bytes when disassembling."},
171 {LLDB_OPT_SET_4, false, "frame", 'f', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Disassemble from the start of the current frame's function."},
172 {LLDB_OPT_SET_6, false, "line", 'l', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Disassemble the current frame's current source line instructions ifthere is debug line table information, else disassemble around the pc."},
173 {LLDB_OPT_SET_ALL, false, "mixed", 'm', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable mixed source and assembly display."},
175 {LLDB_OPT_SET_5, false, "pc", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Disassemble around the current pc."},
177 {LLDB_OPT_SET_ALL, false, "raw", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Print raw disassembly with no symbol information."},
189 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2, false, "debug", 'g', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "When specified, debug the JIT code by setting a breakpoint on the first instruction and forcing breakpoints to not be ignored (-i0) and no unwinding to happen on error (-u0)."},
194 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2, false, "top-level", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Interpret the expression as a complete translation unit, without injecting it into the local context. Allows declaration of persistent, top-level entities without a $ prefix."},
215 {LLDB_OPT_SET_ALL, false, "regex", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Function name and module name are actually regular expressions."},
232 {LLDB_OPT_SET_ALL, false, "hide-aliases", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Hide aliases in the command list."},
233 {LLDB_OPT_SET_ALL, false, "hide-user-commands", 'u', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Hide user-defined commands from the list."},
234 {LLDB_OPT_SET_ALL, false, "show-hidden-commands", 'h', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Include commands prefixed with an underscore."},
242 {LLDB_OPT_SET_2, false, "clear", 'C', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Clears the current command history."},
253 {LLDB_OPT_SET_1, false, "append", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Append to the log file instead of overwriting."},
255 {LLDB_OPT_SET_1, false, "file-function", 'F', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Prepend the names of files and function that generate the logs."},
256 {LLDB_OPT_SET_1, false, "pid-tid", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Prepend all log lines with the process and thread ID that generates the log line."},
257 {LLDB_OPT_SET_1, false, "sequence", 's', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Prepend all log lines with an increasing integer sequence id."},
258 {LLDB_OPT_SET_1, false, "stack", 'S', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Append a stack backtrace to each log line."},
259 {LLDB_OPT_SET_1, false, "thread-name", 'n', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Prepend all log lines with the thread name for the thread that generates the log line."},
260 {LLDB_OPT_SET_1, false, "threadsafe", 't', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable thread safe logging to avoid interweaved log lines."},
261 {LLDB_OPT_SET_1, false, "timestamp", 'T', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Prepend all log lines with a timestamp."},
262 {LLDB_OPT_SET_1, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable verbose logging."},
281 {LLDB_OPT_SET_2, false, "binary", 'b', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "If true, memory will be saved as binary. If false, the memory is saved save as an ASCII dump that uses the format, size, count and number per line settings."},
282 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2 | LLDB_OPT_SET_3, false, "force", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Necessary if reading over target.max-memory-read-size bytes."},
303 {LLDB_OPT_SET_ALL, false, "group-exec", 'X', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow group to execute."},
304 {LLDB_OPT_SET_ALL, false, "group-read", 'R', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow group to read."},
305 {LLDB_OPT_SET_ALL, false, "group-write", 'W', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow group to write."},
308 {LLDB_OPT_SET_ALL, false, "user-exec", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow user to execute."},
309 {LLDB_OPT_SET_ALL, false, "user-read", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow user to read."},
310 {LLDB_OPT_SET_ALL, false, "user-write", 'w', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow user to write."},
311 {LLDB_OPT_SET_ALL, false, "world-exec", 'e', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow world to execute."},
312 {LLDB_OPT_SET_ALL, false, "world-read", 'd', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow world to read."},
313 {LLDB_OPT_SET_ALL, false, "world-write", 't', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow world to write."},
342 {LLDB_OPT_SET_2, false, "waitfor", 'w', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Wait for the process with <process-name> to launch."},
350 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2 | LLDB_OPT_SET_3 | LLDB_OPT_SET_4 | LLDB_OPT_SET_5 | LLDB_OPT_SET_6, false, "all-users", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Show processes matching all user IDs."},
361 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2 | LLDB_OPT_SET_3 | LLDB_OPT_SET_4 | LLDB_OPT_SET_5 | LLDB_OPT_SET_6, false, "show-args", 'A', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Show process arguments instead of the process executable basename."},
364 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2 | LLDB_OPT_SET_3 | LLDB_OPT_SET_4 | LLDB_OPT_SET_5 | LLDB_OPT_SET_6, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable verbose output."},
380 {LLDB_OPT_SET_ALL, false, "continue", 'c', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Immediately continue the process once attached."},
381 {LLDB_OPT_SET_2, false, "include-existing", 'i', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Include existing processes when doing attach -w."},
385 {LLDB_OPT_SET_2, false, "waitfor", 'w', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Wait for the process with <process-name> to launch."},
444 {LLDB_OPT_SET_2, false, "all", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Show all register sets."},
445 {LLDB_OPT_SET_ALL, false, "alternate", 'A', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display register names using the alternate register name if there is one."},
474 {LLDB_OPT_SET_1, false, "allow-reload", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allow the script to be loaded even if it was already loaded before. This argument exists for backwards compatibility, but reloading is always allowed, whether you specify it or not."},
490 {LLDB_OPT_SET_ALL, false, "force", 'f', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Force an empty value to be accepted as the default."},
499 {LLDB_OPT_SET_ALL, false, "append", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Append to saved settings file if it exists."},
537 {LLDB_OPT_SET_4, false, "reverse", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Reverse the listing to look backwards from the last displayed block of source."},
539 {LLDB_OPT_SET_ALL, false, "show-breakpoints", 'b', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Show the line table locations from the debug information that indicate valid places to set source level breakpoints."},
555 {LLDB_OPT_SET_ALL, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable verbose dump."},
576 {LLDB_OPT_SET_1, false, "global", 'g', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display the modules from the global module list, not just the current target."},
577 {LLDB_OPT_SET_1, false, "header", 'h', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display the image base address as a load address if debugging, a file address otherwise."},
579 {LLDB_OPT_SET_1, false, "offset", 'o', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display the image load address offset from the base file address (the slide amount)."},
585 {LLDB_OPT_SET_1, false, "uuid", 'u', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display the UUID when listing images."},
594 {LLDB_OPT_SET_ALL, false, "all", 'A', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Print all matches, not just the best match, if a best match is available."},
599 {LLDB_OPT_SET_3 | LLDB_OPT_SET_4 | LLDB_OPT_SET_5, false, "no-inlines", 'i', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Ignore inline entries (must be used in conjunction with --file or --function)."},
601 {LLDB_OPT_SET_2 | LLDB_OPT_SET_4 | LLDB_OPT_SET_5, false, "regex", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "The <name> argument for name lookups are regular expressions."},
604 {LLDB_OPT_SET_ALL, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Enable verbose lookup information."},
650 {LLDB_OPT_SET_ALL, false, "json", 'j', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display the thread info in JSON format."},
651 {LLDB_OPT_SET_ALL, false, "stop-info", 's', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display the extended stop info in JSON format."},
662 {LLDB_OPT_SET_1 | LLDB_OPT_SET_2 | LLDB_OPT_SET_3, false, "force", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Allows the PC to leave the current function."},
671 {LLDB_OPT_SET_1, false, "internal", 'i', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display internal as well as user thread plans"},
672 {LLDB_OPT_SET_1, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display more information about the thread plans"},
680 {LLDB_OPT_SET_ALL, false, "from-expression", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Return from the innermost expression evaluation."},
713 {LLDB_OPT_SET_ALL, false, "enabled", 'e', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "If specified, this category will be created enabled."},
741 {LLDB_OPT_SET_ALL, false, "regex", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Type names are actually regular expressions."},
742 {LLDB_OPT_SET_ALL, false, "skip-pointers", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for pointers-to-type objects."},
743 {LLDB_OPT_SET_ALL, false, "skip-references", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for references-to-type objects."},
753 {LLDB_OPT_SET_ALL, false, "regex", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Type names are actually regular expressions."},
754 {LLDB_OPT_SET_ALL, false, "skip-pointers", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for pointers-to-type objects."},
755 {LLDB_OPT_SET_ALL, false, "skip-references", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for references-to-type objects."},
764 {LLDB_OPT_SET_ALL, false, "all", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Clear every category."},
772 {LLDB_OPT_SET_1, false, "all", 'a', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Delete from every category."},
792 {LLDB_OPT_SET_ALL, false, "show-help", 'h', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Display available help for types"},
802 {LLDB_OPT_SET_2 | LLDB_OPT_SET_3, false, "expand", 'e', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Expand aggregate data types to show children on separate lines."},
803 {LLDB_OPT_SET_2 | LLDB_OPT_SET_3, false, "hide-empty", 'h', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Do not expand aggregate data types with no children."},
804 {LLDB_OPT_SET_1, true, "inline-children", 'c', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "If true, inline all child values into summary string."},
805 {LLDB_OPT_SET_3, false, "input-python", 'P', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Input Python code to use for this type manually."},
807 {LLDB_OPT_SET_ALL, false, "no-value", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't show the value, just show the summary, for this type."},
808 {LLDB_OPT_SET_1, false, "omit-names", 'O', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "If true, omit value names in the summary display."},
811 {LLDB_OPT_SET_ALL, false, "regex", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Type names are actually regular expressions."},
812 {LLDB_OPT_SET_ALL, false, "skip-pointers", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for pointers-to-type objects."},
813 {LLDB_OPT_SET_ALL, false, "skip-references", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for references-to-type objects."},
824 {LLDB_OPT_SET_3, false, "input-python", 'P', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Type Python code to generate a class that provides synthetic children."},
826 {LLDB_OPT_SET_ALL, false, "regex", 'x', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Type names are actually regular expressions."},
827 {LLDB_OPT_SET_ALL, false, "skip-pointers", 'p', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for pointers-to-type objects."},
828 {LLDB_OPT_SET_ALL, false, "skip-references", 'r', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Don't use this format for references-to-type objects."},
855 {LLDB_OPT_SET_1, false, "brief", 'b', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Give a brief description of the watchpoint (no location info)."},
856 {LLDB_OPT_SET_2, false, "full", 'f', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Give a full description of the watchpoint and its locations."},
857 {LLDB_OPT_SET_3, false, "verbose", 'v', OptionParser::eNoArgument, nullptr, {}, CommandCompletions::eNoCompletion, eArgTypeNone, "Explaineverything we know about the watchpoint (for debugging debugger bugs)."},
tools/lldb/source/Interpreter/CommandInterpreter.cpp 1407 if (value_type == OptionParser::eNoArgument)
tools/lldb/source/Interpreter/OptionGroupBoolean.cpp 28 ? OptionParser::eNoArgument
42 if (m_option_definition.option_has_arg == OptionParser::eNoArgument) {
tools/lldb/source/Interpreter/OptionGroupOutputFile.cpp 28 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
tools/lldb/source/Interpreter/OptionGroupValueObjectDisplay.cpp 37 {LLDB_OPT_SET_1, false, "flat", 'F', OptionParser::eNoArgument, nullptr,
40 {LLDB_OPT_SET_1, false, "location", 'L', OptionParser::eNoArgument, nullptr,
43 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
48 {LLDB_OPT_SET_1, false, "show-types", 'T', OptionParser::eNoArgument,
55 {LLDB_OPT_SET_1, false, "raw-output", 'R', OptionParser::eNoArgument,
57 {LLDB_OPT_SET_1, false, "show-all-children", 'A', OptionParser::eNoArgument,
tools/lldb/source/Interpreter/OptionGroupVariable.cpp 24 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
27 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
30 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
33 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
36 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
40 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeRegularExpression,
43 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
tools/lldb/source/Interpreter/Options.cpp 375 case OptionParser::eNoArgument:
451 if (def.required && def.option_has_arg == OptionParser::eNoArgument) {
477 def.option_has_arg == OptionParser::eNoArgument) {
502 if (def.required && def.option_has_arg != OptionParser::eNoArgument)
513 if (!def.required && def.option_has_arg != OptionParser::eNoArgument)
958 case OptionParser::eNoArgument:
1036 (def == nullptr) ? OptionParser::eNoArgument : def->option_has_arg;
1052 case OptionParser::eNoArgument:
1084 OptionParser::eNoArgument) &&
1205 (def == nullptr) ? OptionParser::eNoArgument : def->option_has_arg;
1207 case OptionParser::eNoArgument:
1379 (def->option_has_arg == OptionParser::eNoArgument)
tools/lldb/source/Plugins/LanguageRuntime/ObjC/AppleObjCRuntime/AppleObjCRuntimeV2.cpp 509 {LLDB_OPT_SET_ALL, false, "verbose", 'v', OptionParser::eNoArgument,
tools/lldb/source/Plugins/StructuredData/DarwinLog/StructuredDataDarwinLog.cpp 377 {LLDB_OPT_SET_ALL, false, "any-process", 'a', OptionParser::eNoArgument,
381 {LLDB_OPT_SET_ALL, false, "debug", 'd', OptionParser::eNoArgument, nullptr,
385 {LLDB_OPT_SET_ALL, false, "info", 'i', OptionParser::eNoArgument, nullptr,
449 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
453 {LLDB_OPT_SET_ALL, false, "subsystem", 's', OptionParser::eNoArgument,
457 {LLDB_OPT_SET_ALL, false, "category", 'c', OptionParser::eNoArgument,
461 {LLDB_OPT_SET_ALL, false, "activity-chain", 'C', OptionParser::eNoArgument,
467 {LLDB_OPT_SET_ALL, false, "all-fields", 'A', OptionParser::eNoArgument,
tools/lldb/source/Target/Platform.cpp 1351 {LLDB_OPT_SET_ALL, false, "rsync", 'r', OptionParser::eNoArgument, nullptr,
1360 OptionParser::eNoArgument, nullptr, {}, 0, eArgTypeNone,
1366 {LLDB_OPT_SET_ALL, false, "ssh", 's', OptionParser::eNoArgument, nullptr,
tools/lldb/source/Target/Process.cpp 367 {LLDB_OPT_SET_ALL, false, "stop-at-entry", 's', OptionParser::eNoArgument,
403 {LLDB_OPT_SET_2, false, "tty", 't', OptionParser::eNoArgument, nullptr,
407 {LLDB_OPT_SET_3, false, "no-stdio", 'n', OptionParser::eNoArgument, nullptr,